In stock: 4
Incl. inner cartridge and accessories
The ARKA myAQUA Multifilter 4000 is ideal for filling with resin/mixed-bed resin, absorbers and many other filter materials, such as e.g. B. activated carbon. Thanks to the built-in 1 inch water-neutral plastic thread and the included 1" to ¾" and ¼" transitions for the water inlet and outlet, it can be used universally both as a downstream resin filter on reverse osmosis systems and for many other purposes.
Furthermore, the standardized size of the filter housing of 20 x 4.5 inches offers the possibility of using a large number of different inner cartridges of this size.
The ARKA myAQUA Multifilter 4000 consists of high-strength, food-safe plastic (PP) and is pressure-resistant up to 28 bar. The double O-ring seal ensures maximum tightness.
The supplied refillable inner cartridge has built-in fine filters on both sides, so that no suspended matter gets into the inner filter and no abrasion or parts of the resin or filter material get out of the inner filter. The two loosely enclosed filter sponges can be used depending on the material used and the filling quantity.
All benefits at a glance:
Installation:
REGARD:
IMPORTANT:
Use the supplied wall bracket or otherwise ensure that the ARKA myAQUA Multifilter 4000 is stable to prevent it from tipping over.
Note the maximum pressure resistance of 28 bar.
We recommend using the two filter sponges supplied loose.
Mon |
11:00 |
- | 19:00 |
Tue |
11:00 |
- | 19:00 |
Wed |
11:00 |
- | 19:00 |
Thu |
11:00 |
- | 19:00 |
Fri |
11:00 |
- | 19:00 |
Sat |
11:00 |
- | 18:00 |
Sun | Closed |